
Recently viewed
Using 3M adhesive tape
-
What can I bond with this 3M adhesive tape?
It is a double-sided adhesive tape for mounting laser-cut and engraved pieces, bonding acrylic, wood and leatherette to fabric, apparel, signage and hard surfaces for a clean, permanent hold with no sewing or messy glue. It comes in a few grades: 300LSE is the most versatile and grips the widest range of surfaces, including low-surface-energy plastics, while 467MP and 468MP are tuned for metals and high-energy plastics.
-
How do I apply it?
Apply the tape to the back of your material first and press it down firmly, it is pressure-activated, so firm, even pressure is what builds the bond. Then cut your piece, the liner can be laser cut along with the material. The adhesive is clear acrylic, so diode lasers may have trouble cutting through it, especially the thicker 468MP. Test on a scrap first, or apply the tape after cutting. When you are ready to mount, peel the liner and press firmly onto your surface.
-
Which 3M adhesive should I choose?
It depends on the surface and the wear it will see. Our guide, 3M Double-Sided Adhesive for Laser Cutting: Which One Should You Choose, walks through the options so you can match the tape to your project.
-
Do I need this if my leatherette already has TPU adhesive?
Not for press-on leatherette patches, those already carry a heat-activated TPU melt backing. Reach for this tape when you are mounting acrylic, wood, or sheets without adhesive, or when you want a no-heat option.
-
Want to learn more?
Visit our Learn Hub for more questions answered, plus guides and project ideas to help you get the most from your materials.









