3M™ Tape Safety Information
We sell three 3M™ tapes for mounting and layering laser-cut pieces. Each is a pressure-sensitive acrylic adhesive supplied on a liner. When the tape is on a part you laser, the adhesive and liner burn along with the material.
What the tapes are made of
- 3M™ 467MP and 468MP are adhesive transfer tapes: a layer of 3M™ 200MP acrylic adhesive on a paper or film liner, with no carrier film. 3M's Safety Data Sheet (document 27-4234-4) lists the adhesive as 100% acrylate polymer.
- 3M™ 9495LE (sold in our store as 300LSE) is a double-coated tape: 3M™ 300LSE acrylic adhesive on both sides of a polyester film carrier. 3M's Material Safety Data Sheet (document 16-2125-9) lists acrylic polymer adhesive on each side and the polyester film.
Test reports
SGS tested samples of the adhesive for 3M China. These are SGS's results for the samples 3M supplied, and they cover only the substances listed in each test.
| Tape | Test | Result | SGS report | Date |
|---|---|---|---|---|
| 467MP / 468MP | EU REACH SVHC Candidate List (253 substances) | Each 0.1% or less (Pass) | SHAEC26004206805_1 | 2026-02-28 |
| 467MP / 468MP | EU RoHS (10 substances) | All not detected (Pass) | SHAEC26004206801_1 | 2026-02-28 |
| 467MP / 468MP | Halogens | Chlorine 105 mg/kg; fluorine, bromine and iodine not detected | SHAEC26004206803_1 | 2026-02-28 |
| 9495LE (300LSE) | EU REACH SVHC Candidate List (253 substances) | Each 0.1% or less (Pass) | SHAEC26034455705 | 2026-11-04 |
| 9495LE (300LSE) | EU RoHS (10 substances) | All not detected (Pass) | SHAEC26034455701 | 2026-11-04 |
| 9495LE (300LSE) | Halogens | Fluorine, chlorine, bromine and iodine not detected | SHAEC26034455703 | 2026-11-04 |
The 467MP / 468MP reports tested 468MP and list 467MP, 467MC, 468MC, 467MPF and 468MPF as related products. The 9495LE reports tested lot 60000C152F. Full reports are available on request.
Laser fumes
Laser cutting and engraving burns and vaporizes material. Laser fumes are harmful to breathe whatever the material. When you laser a part with tape on it, the adhesive, the liner and, on 9495LE, the polyester film burn too. 3M lists carbon monoxide, carbon dioxide and hydrocarbons as products of burning for these tapes.
Set up your workspace
- Ventilation: vent your laser outside every time you cut or engrave. Use an exhaust fan or fume extractor ducted outdoors, away from windows, doors and air intakes, and keep it running until the fumes have cleared.
- Filtration: if you use a fume extractor or air filter, keep the filters clean and replace them on schedule. A room air purifier or recirculating filter does not replace venting outside.
- Personal protection: wear laser safety glasses rated for your laser's wavelength whenever the beam is not fully enclosed. A respirator adds protection, but it does not replace ventilation.
- Keep children and pets away from the work area.
Fire
The tape and its liner burn. Never leave a laser cutter unattended while it's running, and keep the cutting bed clean so debris doesn't catch fire. 3M lists carbon dioxide and dry chemical extinguishers for these tapes, and foam for 9495LE.
Handling, storage and disposal
- Store the tape indoors in a cool, dry place, with sheets kept flat.
- Keep out of reach of children.
- Throw out the liner and scraps with household garbage, following your local rules.
First aid
- Breathing in fumes: move to fresh air. Get medical attention if symptoms continue.
- Eyes: rinse with water for at least 15 minutes. Get medical help if irritation continues.
- Hot or burning adhesive on skin: cool with cold water and get medical attention.
Before you start
Every laser setup is different, so please treat this page and our product information as general guidance, not a guarantee for your machine. Power, speed, focus and ventilation all change from one workspace to the next. Run a test cut on a scrap piece before a full job. If you have questions, we're happy to help.
Safety Data Sheets
This is 3M's document, posted unchanged. 3M may have issued a newer version since this date. For 467MP and 468MP, contact us for safety documents.
3M is a trademark of 3M Company. YXE Creations Craft Hub sells 3M™ tapes and is not affiliated with or endorsed by 3M.
Contact us for the full test reports or other questions about safety documents.








