
Buy More Save More on Acrylic, Plywood & Leatherette Sheets
Mix & match any acrylic, plywood, or leatherette sheets. The more you add to your cart, the bigger the discount.
| Quantity | Discount |
|---|---|
| 10+ items | 3% OFF |
| 25+ items | 5% OFF |
| 50+ items | 10% OFF |
| 100+ items | 15% OFF |
| 250+ items | 20% OFF |
Discount is applied automatically at checkout.
Stock up and save on the materials you use every day. Our bulk discount program is designed for makers, small businesses, and hobbyists who go through acrylic, plywood, and leatherette regularly.
Mix and match any sheets across materials, colors, and thicknesses, everything counts toward your total quantity. Whether you're prepping for a big order or building up your inventory, the more you add, the more you save.
Discounts are applied automatically at checkout, so there’s no need for codes or extra steps, just add your items to the cart and watch the savings grow.
PU Leatherette Safety Information
Our laserable leatherette is a PU (polyurethane) synthetic leather: a polyurethane coating on a polyester and cotton backing. It contains no PVC.
Composition
The supplier's Safety Data Sheet lists these components:
- Polyurethane: 50%
- Polyester and cotton: 20%
- DMFA (N,N-dimethylformamide, CAS 68-12-2): 15%
- Wood powder: 10%
- Toner: 5%
DMFA is a solvent used in making polyurethane coatings. Heating or laser cutting the material may release it as vapour, along with the fumes described below.
Laser fumes
Laser cutting and engraving burns and vaporizes material. Laser fumes are harmful to breathe whatever the material, including wood, paper, acrylic and leatherette.
Because it contains no PVC, this leatherette does not give off the hydrogen chloride gas that PVC vinyl releases when lasered. Polyurethane does contain nitrogen, and burning or lasering it can release carbon monoxide, hydrogen cyanide, isocyanates and other irritating compounds. Treat the fumes as hazardous.
TPU adhesive backing
Sheets ordered with the heat-activated adhesive have a TPU (thermoplastic polyurethane) layer on the back. TPU is also a polyurethane, so expect similar fumes when you cut through it.
Set up a safe workspace
- Ventilation: vent your laser outside every time you cut or engrave this material. Use an exhaust fan or fume extractor ducted outdoors, away from windows, doors and air intakes, and keep it running until the fumes have cleared.
- Filtration: if you use a fume extractor or air filter, keep the filters clean and replace them on schedule. A room air purifier or recirculating filter does not replace venting outside.
- Personal protection: wear laser safety glasses rated for your laser's wavelength whenever the beam is not fully enclosed. Wear nitrile or butyl rubber gloves and eye protection when handling cut pieces and cleaning the machine, and wash your hands afterward. A respirator with organic vapour cartridges adds protection, but it does not replace ventilation.
- Keep children and pets away from the work area.
Fire safety
Never leave a laser cutter unattended while it's running. Keep the cutting bed clean so debris doesn't catch fire. Keep a CO₂ extinguisher, dry chemical powder extinguisher or water spray nearby, and don't use a full jet of water. Clean and maintain your exhaust and filters regularly.
Storage and handling
Store in a cool, well-ventilated place away from heat, open flames, strong acids and oxidizing agents.
Before you start
Every laser setup is different, so please treat this page and our product information as general guidance, not a guarantee for your machine. Power, speed, focus and ventilation all change from one workspace to the next. Run a test cut on a scrap piece before a full job, and set up your workspace so it's safe for you and the people around you. If you have questions, we're happy to help.
Safety Data Sheet
- Laserable leatherette SDS (PDF), supplied by the manufacturer.
Contact us if you have questions about safety documents.









