Share
Glow in the Dark Pigment - Solar Storm Gold
Glow in the Dark Pigment - Solar Storm Gold
Couldn't load pickup availability
Applications:
- Resin Art & Epoxy Projects
- Crafting & DIY Projects
- Painting, Inking & Printing
- Plastic, Rubber & Leather Products
- Clothes & Decorative Items
Basic Usage Guide
Basic Usage Guide
Basic Guide for Use:
- Mixing: Add the small amount of medium (paint, resin, ink, etc.) to the pigment. Stir thoroughly to ensure an even distribution. Then mix with the rest of the medium.
- Application: Apply the mixture to your project surface as you would with regular paint or ink. Ensure an even layer for the best glow effect.
- Charging: Expose your finished project to light (UV or bright lamp) for a few minutes to "charge" the glow.
- Glow Effect: Once charged, your project will glow in the dark for hours. The glow will fade gradually over time, so charge it again to enjoy the effect.
Glow in the Dark Powder Safety Information
Glow in the Dark Powder Safety Information
Glow-in-the-dark powder absorbs light and then glows in the dark. It is used to add a glow to resin, paint, coatings and other craft materials.
Product information
The manufacturer provides this information about our glow-in-the-dark powder:
- Non-radioactive.
- Chemical formula: strontium aluminate, Sr4Al14O25
- Bulk density: 3.5 g/cm³
- pH: 8 to 9
- Luminance: 5723 mcd
- Particle size: 25 μm
Uses
- Home décor: glowing effects on lamps, decorative items and wall art.
- Textiles: glowing designs on fabric.
- Stickers: decorative and functional glow stickers.
- Events: decorations and accessories for parties and festivals.
Our glow-in-the-dark powder is not intended or labelled for cosmetic or body use.
Set up a safe workspace
Glow powder is a fine powder that stays in the air once it's disturbed. Breathing in fine dust can irritate your lungs, so set up your workspace before you open the jar.
- Ventilation: vent your workspace outside with an exhaust fan or fume extractor ducted outdoors, away from windows, doors and air intakes. When you mix the powder into resin or paint, follow the ventilation guidance for that product as well.
- Filtration: scoop gently instead of pouring, and wipe up spills with a damp cloth rather than sweeping or blowing them. If you use an air filter or dust collector, keep its filters clean.
- Personal protection: wear a dust mask or particulate respirator when handling the powder, plus gloves and eye protection.
- Keep children and pets away from the work area.
Storage
Keep the lid closed and store in a cool, dry place away from moisture and direct sunlight.
Tips
- Charge it with light: the powder needs light exposure, such as a lamp or flashlight, before it glows. A 10-minute charge gives a glow that lasts for hours.
- Test first: check how the powder mixes and glows in your chosen medium. The colour can shift slightly in resin or other coloured mediums.
- Limit UV exposure: our glow powders are not UV-resistant. Long exposure to sunlight can fade the glow, so charge with artificial light where you can.
Before you start
Every project and workspace is different, so please treat this page and our product information as general guidance, not a guarantee of results. Test a small batch before a full project, and set up your workspace so it's safe for you and the people around you. If you have questions, we're happy to help.
Contact us if you have questions about safety documents.










